Popular
-
Bobcat Miner 300
$430.00
-
Goldshell LT6 3350MH/s 3200W LTC/DOGE
$8,890.00
-
iBeLink BM-K1 MAX 32TH/s 3200W (KDA)
$38,999.00
-
iPollo V1 Mini 280MH/s 224W ETH/ETC
$1,750.00
-
Nebra Indoor Hotspot Miner ROCK Pi
$530.00
Heltec Indoor Hotspot EU868
$450.00
- CPU: Quad-core Cortex-A53 64-bit 1.5GHz;
- RAM: 2G DDR4;
- ROM: 32G eMMC 5.1;
- LoRa baseband: SX1308 + SX1255/7 chipset.
Benefiting from the Helium LongFi technology that maximizes range and battery life without Wi-Fi, cellular, or Bluetooth, the Heltec Indoor Hotspot is introduced to the community. as an efficient miner for a new cryptocurrency, Helium (HNT). the Heltec Hotspot is completely easy to set up in minutes using only your smart devices. with its efficient power management system, it allows you to build up your LoRa application at a lower cost. equipped with the high DBI antenna, the unit provides a long-range of wireless network coverage and data transmission capacity for your devices that ensure you more profitabilities contributes to The People’s Network of Helium community.
Heltec Indoor Hotspot (HT-M2808) main attributes:
-
Main hardware
- CPU: Quad-core Cortex-A53 64-bit 1.5GHz;
- RAM: 2G DDR4;
- ROM: 32G eMMC 5.1;
- LoRa baseband: SX1308 + SX1255/7 chipset.
-
Network Connection
- Wi-Fi: 2.4GHz/5GHz
- Bluetooth: BT V5.0 EDR and BLE
- Ethernet: 10/100M (Does not support PoE power supply, if must use PoE function, POE Splitter is must needed)
-
Body size
- Without footpads and SMA antenna socket: 120 * 115 * 35
- Include footpads and SMA antenna socket: 120 * 122.5 * 40
-
Interface and interactive
- 5.5mm diameter socket: 12V DC power source input;
- RJ45 socket: Ethernet connection;
- Anti-theft lock hole: Anti-theft lock interface;
- Power Button with Blue LED;
- SMA Socket: LoRa antenna with inner holes and threads;
- Type C Socket: Firmware flash during production and system recovery for user;
- 1mm diameter hole: System recovery trigger, need to cooperate with the reset button or power-on sequence.
-
Status indication LEDs
- Power Button with Blue LED
- Five minutes blinking after power-on, Bluetooth can be connected at this time;
- The Bluetooth connection is successful or the flickering stops after five minutes of booting.
- White — System Status
- Light up: System running.
- Blue — Wi-Fi connection status
- Orange — Blockchain synchronization instructions
- Blink: Syncing
- Steady ON: synchronization is over
- Green — LoRa receive
- Red — LoRa transmit
- Power Button with Blue LED
-
Other highlight function
- A keyhole is reserved, which can be used for anti-theft.
- Heltec Indoor Hotspot has a cooling fan inside, which can be used to take away the heat generated by the operation of the system to ensure long-time stable operation.
Related products
-
Sale!
SenseCAP M1 LoRaWAN Indoor Gateway – AS923 4G
$500.00Add to cartSpecifications
Processor Raspberry Pi 4 (Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz) RAM 4GB Storage 64GB MicroSD Card Frequency EU868 Version: 863MHz ~ 870MHz US915 Version: 902MHz ~ 928MHz
Sensitivity -125dBm @125KHz/SF7 -139dBm @125KHz/SF12 TX Power Up to 26 dBm Antenna Gain US915: 2.6 dBi EU868: 2.8 dBi
Antenna Impedance 50 Ohm Antenna Radiation Pattern Omni-Directional Wi-Fi 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless Bluetooth Bluetooth 5.0, BLE LoRaWAN Supports Class A, C Input Voltage DC 5V – 3A Interfaces USB Type-C (Power Supply) * 1 Ethernet RJ45 * 1
RP-SMA Female Antenna Connector* 1
Operating Temperature 0°C to 50°C Relative Humidity 0% – 90% (non-condensing) Heat Dissipation Aluminum enclosure, a heatsink, and a cooling fan IP Grade IP20 Certification FCC / CE LEARN AND DOCUMENTS
Documentations
CE Certificates
SenseCAP M1 EU868（WM1302）
SenseCAP M1 EU868（WM1303）
-
Sale!
Bobcat Miner 300 Helium AS923 Hotspot Miner
$500.00Add to cartAS923 – Indonesia, Malaysia, Philippines, Singapore, Thailand, and Vietnam
Bobcat Miner 300 is a high-efficiency miner hotspot for HNT. It is compatible with Helium LongFi, an architecture that combines the leading wireless LoRaWAN protocol, and the Helium Blockchain technology. The Bobcat Miner 300 is also compatible with all LoRaWAN devices.
Firmware
Ready for Shipping -
Sale!
Bobcat Miner 300 Helium Hotspot for HNT – US 915
$500.00Add to cartUS915 – North America
Bobcat Miner 300 is a high-efficiency miner hotspot for HNT. It is compatible with Helium LongFi, an architecture that combines the leading wireless LoRaWAN protocol, and the Helium Blockchain technology. The Bobcat Miner 300 is also compatible with all LoRaWAN devices.
Firmware
Ready for Shipping
247 Customer Service
Speak to us at your convenient Time about Products, Delivery, Refund, Guaranty, Payment Terms
Read More
Product Showcase
Reviews
There are no reviews yet.