Popular
-
Bobcat Miner 300
$430.00
-
Goldshell LT6 3350MH/s 3200W LTC/DOGE
$8,890.00
-
iBeLink BM-K1 MAX 32TH/s 3200W (KDA)
$38,999.00
-
iPollo V1 Mini 280MH/s 224W ETH/ETC
$1,750.00
-
Nebra Indoor Hotspot Miner ROCK Pi
$530.00
LoRa Fiberglass Antenna, 858-878MHz, 8dBi, 1300mm
$45.00
Fibreglass LoRa antenna with gain of 8dBi, frequency range 858-878MHz and 130cm length
PRODUCT DETAILS
Features
- Average gain: 8dBi
- Frequency range: 858-878MHz
- Length of 130cm
- Robust enough to withstand the harsh outdoor environment
- can connect to the SenseCAP Outdoor Gateway and SenseCAP M1 Indoor Gateway
- Includes hardware for mounting
- Comes with a 1m cable
For some applications like in an urban environment or where large stretches of land have to be monitored the normal range of LoRa might not be enough. So If you need to increase the range for your LoRa devices, then this outdoor LoRa Fiberglass antenna will be the ideal addition to your LoRa system. It’s a robust solution to provide extra power and range for outdoor LoRa Base stations. The antenna has an average gain of 8 dBi, a length of 130cm, and a frequency range from 858-878MHz, and it comes with hardware for pole and wall mounting.
The Antenna has an N-J Double tooth connector, and it comes with an N-Female to RP-SMA plug cable so it can be easily connected to the SenseCAP Gateways.
Application
The antenna can be used in any environment where long-range LoRa connections are required.
- Agriculture
- Environmental Monitoring
- Urban Monitoring
Parameters
| Frequency | 858-878MHz |
| V.S.W.R | <=2.0 |
| Antenna Gain | 8.0 +/-0.8dBi |
| Efficiency | >=60% |
| Radiation Pattern | Omni-Directional |
| Max Input Power | >=2W |
| Polarization | Linear polarization/ Vertical |
| Impedance | 50 Ohm |
| Material of Radiator | CU |
| Material of Plastic | FRP (white light) |
| Cable Type | RG-141 50Ohm |
| Connector Type | N-J Double tooth connector |
| Operation Temperature | -30°C ~65°C |
| Storage Temperature | -30°C~65°C |
| Antenna Color Storage life | < 2 year |
| Cable length | 1m |
ECCN/HTS
| HSCODE | 8517707090 |
| UPC |
Related products
-
Sale!
SenseCAP M1 LoRaWAN Indoor Gateway – AS923 4G
$500.00Add to cartSpecifications
Processor Raspberry Pi 4 (Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz) RAM 4GB Storage 64GB MicroSD Card Frequency EU868 Version: 863MHz ~ 870MHz US915 Version: 902MHz ~ 928MHz
Sensitivity -125dBm @125KHz/SF7 -139dBm @125KHz/SF12 TX Power Up to 26 dBm Antenna Gain US915: 2.6 dBi EU868: 2.8 dBi
Antenna Impedance 50 Ohm Antenna Radiation Pattern Omni-Directional Wi-Fi 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless Bluetooth Bluetooth 5.0, BLE LoRaWAN Supports Class A, C Input Voltage DC 5V – 3A Interfaces USB Type-C (Power Supply) * 1 Ethernet RJ45 * 1
RP-SMA Female Antenna Connector* 1
Operating Temperature 0°C to 50°C Relative Humidity 0% – 90% (non-condensing) Heat Dissipation Aluminum enclosure, a heatsink, and a cooling fan IP Grade IP20 Certification FCC / CE LEARN AND DOCUMENTS
Documentations
CE Certificates
SenseCAP M1 EU868（WM1302）
SenseCAP M1 EU868（WM1303）
-
Sale!
Nebra HNT Indoor Hotspot Miner – 868MHz
$400.00Add to cartIndoor vs Outdoor Miner
The biggest difference is the outdoor unit comes in a case which is suitable to be used outside in mixed environments and has a few extra features. To help you decide we’ve created this handy guide.
Why earn HNT & use Helium?
Millions of compatible devices can use The People’s Network and each device requires Data Credits (DC) in order to send data to the Internet. Fixed in value, DC are created by ‘burning’ HNT, reducing the total supply to achieve a Burn and Mint Equilibrium. The more devices using DC, the more HNT will be burned.
Helium’s wireless network based on LoRaWAN is best suited for low-power scenarios like sending data to and from sensors using low-cost radio waves, eliminating reliance on more costly networks like cellular and WiFi. It’s fully peer to peer and leverages a robust network of hotspots connected to the network. With just 100 to 200 hotspots, the network can usually cover most cities. In return for hosting hotspots, hosts can earn $HNT for providing access to the LongFi network.
How are Tokens Earned?
Hotspots earn HNT for building and securing network infrastructure and transferring device data. The amount of HNT distributed to Hotspots depends on the type of “work” they perform based on the value to the network. This validation of network contribution is accomplished by a new work algorithm called Proof-of-Coverage (PoC).
To participate in PoC there must be multiple Hotspots at least 300 meters apart in an area, but still within range of each other (up to many miles depending on environment). Single Hotspots earn less as they can only issue Challenges over the internet, and can’t participate in Proof-of-Coverage. After the first year, distribution amounts adjust.
How do I change HNT to normal currency or vice versa?
We recommend using Binance.us which allows HNT/USD trades or you can use Binance.com to exchange HNT into Bitcoin and then from Bitcoin into GBP, EUR or other currencies. However other exchanges are also available.
Are there any fees when setting up my Nebra Hotspot?
When setting up any Helium Hotspot Miner there is a $40 activation fee and a $10 fee when setting the hotspot’s location.
As part of your purchase price we cover the $40 activation fee and the first location assert fee of $10 (worth $50 in total).
However every time you move your hotspot to a new location you will need to pay the $10 location assert fee again.
The full list of Helium transaction fees can be found in the Helium documentation.
Supporting Helium
We’re happy to announce that for every Helium hotspot miner sold we’re committing to giving $1 per device as a donation to DeWi.
Please Note….
If you’re interested in an Outdoor HNT Hotspot Miner, then please check out this model.
-
Sale!
SenseCAP M1 LoRaWAN Indoor Gateway – AS923 8G
$519.00Add to cartSpecifications
Processor Raspberry Pi 4 (Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz) RAM 4GB Storage 64GB MicroSD Card Frequency EU868 Version: 863MHz ~ 870MHz US915 Version: 902MHz ~ 928MHz
Sensitivity -125dBm @125KHz/SF7 -139dBm @125KHz/SF12 TX Power Up to 26 dBm Antenna Gain US915: 2.6 dBi EU868: 2.8 dBi
Antenna Impedance 50 Ohm Antenna Radiation Pattern Omni-Directional Wi-Fi 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless Bluetooth Bluetooth 5.0, BLE LoRaWAN Supports Class A, C Input Voltage DC 5V – 3A Interfaces USB Type-C (Power Supply) * 1 Ethernet RJ45 * 1
RP-SMA Female Antenna Connector* 1
Operating Temperature 0°C to 50°C Relative Humidity 0% – 90% (non-condensing) Heat Dissipation Aluminum enclosure, a heatsink, and a cooling fan IP Grade IP20 Certification FCC / CE LEARN AND DOCUMENTS
Documentations
CE Certificates
SenseCAP M1 EU868（WM1302）
SenseCAP M1 EU868（WM1303）
-
Sale!
MNTD RAK V2 Goldspot Helium Miner Limited Edition 8GB EU868 NEW
$580.00Add to cartAll orders will be dispatch As per Delivery Batch In Order. Machine Will be ship In 48 Hours On Delivery Date from our Global Stores Limited Warehouse, in case of bulk order we may take a day or two to ship the product via (DHL Express/ UPS/ ARAMEX/ EMS) after full payment of the order has been verified (Payment via Coinbase Commerce gateway would take a few minutes to verify the transaction).
International delivery usually takes about 4-5 business days.
247 Customer Service
Speak to us at your convenient Time about Products, Delivery, Refund, Guaranty, Payment Terms
Read More
Product Showcase
Reviews
There are no reviews yet.